滴灌带设备是有很多的部件组成的，那么在我们的日常使用的时候，要是时间长了会出现短路的现象，那么应该如何处理呢，下面将具体解析。 Drip irrigation belt equipment is of many parts, so in our daily use, if after a long time will appear the phenomenon of short circuit, so should be how to deal with, the following will be specific analysis. 滴灌带绕组短路点匝数超过1/12时，要全部拆除重绕。 When the winding circuit of drip irrigation winding is more than 1/12, the rewinding should be completely removed. 短路在滴灌带设备的线槽内。将其软化后，找出短路点修复，重新放入线槽后，再上漆烘干。 Short circuit in the grooves of drip irrigation equipment. After softening it, find out the short-circuit spot repair, put it back into the groove and then finish the drying. 短路点在端部可用绝缘材料将短路点隔开，也可重包绝缘线，再上漆重烘干。 The short circuit point can be separated by a short circuit point in the end of the insulation material. 对短路线匝少于1/12的每相绕组，串联匝数时切断全部短路线，将导通部分连接，形成闭合回路，供应急使用。 For each phase winding that is less than 1/12 of the turn of the short circuit, the series turns off the entire short circuit, and the link is connected, forming a closed loop, and the supply is in urgent use.